Back |  Home |  Contact |  Unique features |  Specifications 

TEK-35 OPTIONS     2002

ALL PRICES IN US FUNDS
ALL OPTIONS MUST BE PRE-PAID

BASE PRICE
   Ready to sail US

   

ANCHORING - DOCKING - SAFETY
1. A) Windlass - Lewmar, Concept 1 "GYPSY"

 
  • Structurally built-in
  • Up/Dn controls at Port steering station
  • Extra battery, wiring and controls
  • 50' (15m) 5/16" HT Chain
  • 5/8" x 30' bridle c/w swivel
  • 5/8" x 150' nylon 3 strand rope (chain links at 50' intervals)
  • 35' DELTA anchor
  • SS & composite bow roller c/w lock pin
 
1. B) Remote control

 
  • Up/Dn pushbuttons at windlass
 
2. Windlass - Lewmar, Concept 1 "GYPSY & CAPSTAN"

 
  • All features of 1.A)
  • Capstan and swivel block set up for all halyard control
  • Up/Dn pushbutton at windlass
 
3. Safety deck Lines

 
  • 3/16" SS vinyl coated wire
  • Eye bolts, swaged toggles c/w pins
  • One- dodger door Port to Starboard
  • Two - sail locker forward to aft hatch
 
4. A) Fenders Set of 4

 
  • 8" x 20", white, ribbed
  • 6' x 1/2" line
 
4. B) Fender covers black or blue, set of 4

     
5. Dock lines - Set of 4 - Gold Braided Nylon

 
  • 2 - 20' x 1/2"
  • 2 - 35' x 1/2"
 

SAILS
  1. Main Sail (STANDARD)

 
  • Fully Fully Battened
  • 3 Reefs
  • 6 Battens & Cars
  • 462 ft² (44 m²)
Sail plan
  2. Self Tacking Jib (STANDARD)

 
  • Reef point
  • 3 battens (partials)
  • Battens & Reef, 273 ft² (26 m²)
 
  3. Storm Jib (STANDARD

 
  • (High Strength), 68 ft² (6.5 m²)
 
4. #1 Genoa (420 sq. ft)

 
  • Light air c/w wire luff
  • 4 oz. Pentex mylar
  • Sheafer 650-00 Furler
  • Spinnaker pole c/w tangs, bridle and all supporting fittings
  • UV protective stripe
  • Sheets, halyard and blocks
 
5. #1 Asymmetrical Spinnaker

 
  • 3/4 oz. 1400 sq ft.
  • Sheets, halyard and blocks
 
6. #2 Asymmetrical Spinnaker

 
  • 1 1/2 oz. 800 sq ft.
  • Sheets, halyard and blocks
 
7. Mainsail cover

 
  • Colour of choice (standard chart)
  • Made to accommodate lazy jacks
  • High durability Sunbrella material
 
8. Jib cover

 
  • Colour of choice (standard chart)
  • Made to accommodate hanked on position of sail
  • Can be lashed to nets
 
  9. A) Reefing  

 
  • Lazy jacks (STANDARD)
  • #1 Reef line (STANDARD)
 
9. B) Extra Reef line

 
  • #2 Reef line c/w EYE
 
9. C) Extra Reef line

 
  • #3 Reef line c/w EYE
 
10. Wing Mast

 
  • Full carbon construction
  • Rotating
  • Stationary wind speed and navigation light control
  • Designed equivalent of storm sail for severe weather sailing
 
11. Electric winch

 
  • #44 Lewmar (anodized aluminum)
  • Heavy duty wiring and battery upgrade
  • Breaker and controls at winch
  • Ceiling modifications at port aft berth
 
  12. A) Winch handles (STANDARD)  

 
  • 2 provided
 
12. B) Extra Winch handle

 
  • 10" lock in, alloy
 
12. C) Extra Winch handle

 
  • 10" lock in, alloy, power grip
 
13. Club racing package

 
  • High performance Pentax Laminate
  • Tri-radial construction
 
14. Offshore high performance cruising/racing package

 
  • Vectran laminate
  • Tri-radial construction
 

STRUCTURAL
1. Commissioning

 
  • Transport to water
  • Launch
  • Step mast
  • Install running rigging
  • Install sails, C.B.
  • Calibrate instruments
  • Test all systems
  • Test sail, training
 
2. Hull colour change

 
  • Colour list available
 
3. Detailing, accents, name, number

 
  • Will quote
 
  4. Antifouling  

 
  • Petit 6999 primer and two coats of ACP-50 antifouling (STANDARD)
 
5. Barrier coat (long term protection)

 
  • Hulls sanded
  • Triple epoxy layers applied
  • Standard antifouling system applied on top
 
  6. Cockpit table (STANDARD)  

 
  • Dining position and floor position
  • Seat height position with extension c/w quick pins
 
  7. Cockpit cushions (STANDARD)

 
  • 9 pieces
  • Heavy outdoor Sunbrella material
  • Domes fasten to structure
  • Covers removable for washing
  • Closed cell foam
 
  8. Cockpit table cushion for outside lounging, sleeping, sun bathing (STANDARD)

 
  • Same construction as #7
  • Folded down the middle for easy storage
 
  9. Dining table set to seat height (STANDARD)

 
  • C/w cushion (fold down the middle)
 
10. Cockpit Dodger/Bimini

 
  • Heavy duty S.S. shaped tubing c/w release pins
  • Sunbrella material
  • Extra strength perimeter zipper
  • Zip out window
  • Complete installation
 
  11. Davits (STANDARD)  

 
  • 4" anodized aluminum tubes
  • 60" centres
  • Single line to raise & lower
  • Stopper and winch for easy control
 
  12. Companionway stairs grab handles (2) (STANDARD)

 
  • 36" x 1", S.S.
  • Structurally installed
  13. Transom steps grab handles (2) (STANDARD)

 
  • 24" x 1", S.S.
  • Structurally installed
  • Backing plate
 
14. Steering position bimini

 
  • Protection from rain, spray, sun
  • From Port to starboard steering positions
  • Independent of cockpit dodger/bimini
  • Will quote
 
15. Full cockpit enclosure

 
  • Protection from rain, spray, sun, insects, cold
  • Connected to cockpit dodger/bimini
  • Will quote
 

SYSTEMS
  1. 4-stroke upgrade of HONDA outboard (STANDARD)

 
  • C/w power propeller
 
2. Extra propane cylinder (20lb)

 
  • Base support fabricated
  • Cylinder installed
  • Cylinders filled
 
3. Propane oven

 
  • Stainless steel construction
  • Deck SS mushroom vent
  • Hoses, fittings, hardware
  • Testing
 
  4. Pressure system (STANDARD)  

     
5. Hot water system

 
  • Bosch automatic hot water heater
  • Pressure relief installed
  • Piping, fittings, mounting
  • Installed and tested
 
6. A) Transom shower

 
  • Hot and cold
  • Recessed valves On/Off Hot/Cold
  • Piping, fittings, mounted
  • Installed starboard transom area
 
6. B) Transom shower

 
  • Cold only
 
7. A) Salt water or fresh water hand pump

     
7. B) Salt water or fresh water foot pump

     
  8. Waste systems  

   
  8. A) Head to 3 way valve  

 
  • Fill holding c/w pump out hose & fitting
  • Direct discharge overboard (STANDARD)
 
8. B) Head to holding tank

 
  • Tank outlet to 3 way valve
    1. To pump out c/w hose & fitting
    2. To electric macerator pump for overboard discharge
 
8. C) Head to 3 way valve

 
  1. To holding tank
  2. To direct overboard discharge
    Outlet of holding tank to 3 way valve
  1. To pump out
  2. To macerator for overboard discharge
 

ELECTRICAL SYSTEMS
1. Extra batteries

 
  • 119 AH Surrette Heavy Duty Marine
 
  2. Solar Panels  

 
  • KYOCERA high efficiency 120W panels
  • Tempered glass protection in an aluminum frame
  • Panels mounted on composite bearings to the davit supports
  • Panels are adjustable to 30 degrees aft. horizontal and 30 degrees forward
  • All S.S. and aluminum construction
  • Panels are Schottky diode protected
  • Solar power regulator installed
2. A) One x 120W Solar Panel

     
2. B) Two x 120W Solar Panels

     
3. 12VDC receptacle

     
4. A) 12VDC lights - halogen

     
4. B) 12VDC lights - fluorescent

     
5. 12VDC fans

     
6. Ground plates

 
  • One ground plate is STANDARD
  • Second ground plate (3" x 12" x 1/2") installed
 
7. Shore power package

 
  • 50' power cable 30a/100v
  • Receptacle - Port steps
  • Control panel at Nav station
  • C/w meter (v), main breaker, 5 - 15A circuit breakers
  • Design in progress
 
8. AC receptacles

     
  9. Spreader lights (2) (STANDARD)

     

ELECTRONIC SYSTEMS
1. Raytheon ST60 WIND & ST60 TRIDATA

 
  • Provides :
    • True & apparent wind speed & direction
    • Max. wind speed alarm
    • Boat speed, log, depth, sea temperature
  • Port steering position - STANDARD
  • Starboard steering position
 
2. Raytheon ST60 MULTI DISPLAY

 
  • Mounted at navigation station
  • Provides :
    • All wind and tri data information
    • All autohelm information
    • GPS data if installed
    • Battery voltage
 
3. Autohelm ST4000+

 
  • Wheel mounted
  • Low power consumption
  • Easy engage/disengage
 
4. Autohelm remote ST600 c/w full display

 
  • Remote socket mounted inside port dodger
 
5. Additional remote sockets

     
6. RL72 7" LCD Radar/112 GPS

 
  • C/w 2 kw dome (16 mile range)
 
7. RL72 7" LCD Radar/Chart plotter, GPS

 
  • C/w 2 kw dome (16 mile range)
 
  8. VHF Radio c/w antenna & installation STANDARD  

     


All prices are subject to change without notice, contact TEK-composites for up-to-date pricing.

Current configurations and lists of standard equipment are available from our office.